excellent sealing in areas with wide gaps between sheets
applicable on oiled or non-oiled, galvanized bare sheets
excellent sealing of sheets and areas subject to infiltration of moisture, dust, noise etc.
excellent adherence to metal surfaces
highly compatible with painting systems (primer, enamel)
The Preformed Threadable Sealing Mastic is used to seal areas of the vehicle which contain wide gaps between sheets and to repair paintwork in areas difficult to reach using threadable plastisol. It is a thermally cured product used to seal sheets, protecting the automotive body from noise, dust penetration and corrosion brought about by water infiltration.
The material can be applied in all places containing sheets junctions, around shock absorber towers, rain gutters, door finishing, the hood, trunk lids etc.
In order for the Preformed threadable Sealing Mastic to achieve its physical-chemical properties, it must be activated at a temperature of at least 170ºC. It can be expanded by between 0 to 200%.
Preformed cavity filler
Main Features:
expandable
superb protection against corrosion
application at room temperature
good adhesion
highly compatible with e-coat
In the technical sector, the term "Cavities" means the parts of the automotive bodywork which are confined between sheets and are geometrically irregular, which limits variable amplitude volumes. The vehicle has lots of cavities.
Due to the very fact they are hollow, they propagate sound and amplify the outside noise and vibrations when the vehicle is in motion. Furthermore, the cavities also allow penetration by humidity, which is why they are considered high corrosion risk areas.
The Preformed Cavity Protection is a thermoplastic, single component material, which is expanded at hot temperatures, and was created to ensure sound insulation and maximum anti-corrosion protection in vehicle cavities.
Following submission to a minimum temperature of 160ºC, the product forms a spongy structure of closed cells, and can expand by 0 to 1000%. It is applied manually, and attached mechanically, allowing the e-coat to be drained.
Plastisol for Coating
Main features
available in several colors
available in several hardness levels
application for hooks, fitness equipment, tools and labels, among other items
used applied in spread coating / rotational molding
The Vinicol Plastisol for Coating line comes in a wide range of colors, with different finishing surfaces and different hardness levels. The material can be applied to:
coat hooks for chroming, protecting them from galvanic baths and preventing them from consuming the metals in the bath, due to the dielectric property.
coat fitness equipment, providing softness for manipulation
coat tool cables, due to its dielectric properties
for spread coating / rotational molding, it is used to manufacture hollow and moldable parts due to its advantageous physical properties for application, including parts for very small locations. Such as labels, key rings, toys etc.
Plastisol for filters
Main features
highly resistant to lubricating oils
resistance to fuels (petrol, alcohol, diesel)
manually or automatically applicable at room temperature
excellent adhesion to bare or galvanized sheets
The Plastisol for Filters line is used to manufacture filters. The material offers excellent chemical resistance and is used as a bonder between the metal lid and filtering element. It has a low viscosity to facilitate application.
The product is activated at a temperature of 180ºC so that it achieves physical-chemical properties of resistance against lubricating, mineral and hydraulic oils.
Polyurethane for filters
Main features
air curing
highly resistant to lubricating oils
resistance to fuels (petrol, alcohol, diesel)
manually or automatically applicable at room temperature
excellent adhesion to bare or galvanized sheets
The Polyurethane for Filters is used to manufacture filters. The material offers excellent chemical resistance and is used as a bonder between the metal lid and filtering element. It has a low viscosity to facilitate application.
This material is applied easily, and as it can be air curing, it achieves the physical-chemical properties of resistance against lubricating, mineral and hydraulic oils.
Seaming Adhesive for filters
Main features:
It can be activated at accelerated temperature or by air drying
highly resistant to lubricating oils
excellent resistance to fuels (petrol, alcohol, diesel)
manually or automatically applicable at room temperature
excellent adhesion to bare or galvanized sheets
The Vinicol Seaming Adhesive for filters line is used to manufacture filters. The material offers excellent chemical resistance and is used as a bonder between the metal lid and filtering element. It has a low viscosity to facilitate application.
The product is activated at a temperature of 180ºC or in emulsion systems using air drying, so that it achieves physical-chemical properties of resistance against lubricating, mineral and hydraulic oils.
Paper adhesive for filters
Main features:
It can be activated at accelerated temperature or by air drying
highly resistant to lubricating oils
resistance to fuels (petrol, alcohol, diesel)
manually or automatically applicable at room temperature
The Vinicol Paper Adhesive for Filters line is used to manufacture filters. The material offers excellent chemical resistance and is used to bond paper. It has a low viscosity to facilitate application.
The product is activated at a temperature of 180ºC or in emulsion systems using air drying, so that it achieves physical-chemical properties of resistance against lubricating, mineral and hydraulic oils.
Plastisol for transfer and fabrics
Main Features:
fast cure
high viscosity
high opaqueness
excellent cover for several fabrics
high gloss
high flexibility
resistant to washing
The Vinicol Plastisol for Transfer and Fabrics Line has been developed for use in off-set and silk screen printing, and can be applied on a wide range of fabrics (100% cotton, synthetic or mixed).
After being applied on specific paper, the Plastisol for Transfer is transferred to the fabric using a normal press, along with the plastisol for paper printing. The Plastisol for Transfer can also be applied directly on fabrics.
The material is cured quickly, speeding up the material transfer process.
On fabric, it presents high resistance to washing, has excellent flexibility, gloss and cover.
Plastisol for Coating
Main features
available in several colors
available in several hardness levels
application for hooks, fitness equipment, tools and labels, among other items
used applied in spread coating / rotational molding
The Vinicol Plastisol for Coating line comes in a wide range of colors, with different finishing surfaces and different hardness levels. The material can be applied to:
coat hooks for chroming, protecting them from galvanic baths and preventing them from consuming the metals in the bath, due to the dielectric property.
coat fitness equipment, providing softness for manipulation
coat tool cables, due to its dielectric properties
for spread coating / rotational molding, it is used to manufacture hollow and moldable parts due to its advantageous physical properties for application, including parts for very small locations. Such as labels, key rings, toys etc.
Products
